How many stops should an audio guide have?
Between 8 and 25 for most venues. How to balance listening time with visit time, choose which stops to include, add an optional deeper layer and examples for museums, wineries, cathedrals and walking routes.
- By
- By Muvo Editorial Team
- Last updated
- 4 min read
- 4 min read
Most audio guides work best with between 8 and 25 stops. Fewer than eight and visitors feel they paid attention to a leaflet; more than 25 and few people reach the end. The right number for your venue comes from one calculation: how long people actually stay, and how much of that time they want to spend listening.
This guide is part of how to make an audio guide. It explains how to set the number, how to choose the stops and how to give enthusiasts more without overloading everyone else.
The short answer
| Type of venue | Typical number of stops | Typical listening time |
|---|---|---|
| Small museum or gallery | 12 to 20 | 20 to 30 minutes |
| Large museum (highlights tour) | 15 to 25 | 30 to 40 minutes |
| Castle or historic house | 10 to 15 | 15 to 25 minutes |
| Cathedral or church | 8 to 12 | 12 to 20 minutes |
| Winery or distillery | 6 to 10 | 10 to 15 minutes |
| Walking tour | 8 to 12 | 15 to 25 minutes, plus walking |
| Garden or nature trail | 8 to 12 | 12 to 20 minutes |
Listening time vs visit time
Visitors do not only listen. They walk, look, read, talk to each other and stop for coffee. As a rule of thumb, plan for audio to fill about half of the time people spend inside.
- Find the average length of a visit: ticket timestamps, staff estimates, or time a few visitors yourself.
- Take about half of that as your total listening time.
- Divide by the length of a typical stop, around 90 seconds.
A 50-minute visit gives about 25 minutes of audio, or roughly 16 to 17 stops of 90 seconds. Twenty stops of 90 seconds add up to 30 minutes, which suits a visit of about an hour.
How to choose the stops
Walk the route with fresh eyes and pick places where three things meet:
- People already stop there. A doorway, a famous object, a view.
- There is something to see. Audio works best when it can point at a detail.
- There is a story. Not just a fact, but a person, a change or a mystery.
Then check the spacing. Stops too close together feel like a lecture; stops too far apart leave long silences. In a building, one stop per room or major object usually works. On a route, aim for a stop every three to five minutes of walking.
Choose the stops with someone who does not know the collection. Experts tend to pick what is important; newcomers point at what is interesting.
Main route and a deeper layer
You do not have to choose between a short guide and a complete one. Give everyone a main route of the essential stops, and offer optional extra stops for visitors who want more.
- Main route: 12 to 20 stops that tell the story of the place from start to finish.
- Deeper layer: extra stops on specific objects, a curator's view, a detail for specialists.
On a QR guide, extra stops can simply have their own code, marked "more" on the sign. Visitors in a hurry skip them; enthusiasts collect them. You can also organise them as a separate themed tour.
Examples by venue
A small art museum, 15 stops. One stop per room plus three highlights, 90 seconds each. Total: about 23 minutes. A second tour for families uses six of the same objects with a children's script.
A winery, 8 stops. Vineyard view, harvest, pressing, fermentation tanks, barrel room, bottling, cellar library and tasting room. Each stop 60 to 90 seconds, because people are walking and talking.
A cathedral, 12 stops. Entrance, nave, the oldest chapel, the main altarpiece, choir stalls, two windows, the tomb of the founder, the cloister and three details most visitors miss. Silence matters here, so visitors listen with earphones or at a low volume.
A walking tour, 10 stops. Spread over two kilometres, one every five minutes of walking, with the route explained at the end of each stop.
Signs you have too many stops
- The last third of the stops have far fewer listens than the first.
- Visitors skip whole sections.
- Staff hear "it's too long" at the desk.
If you see this in your statistics, cut or merge the weakest stops, or move them to the deeper layer. How long should an audio guide stop be? explains how to shorten the stops themselves.
Start small
If you are unsure, launch with 10 well-written stops and add more later. A short guide that people finish is more valuable than a long one they abandon. On Muvo's free Zero plan you can publish 10 stops and one tour, which is enough to test the format with real visitors.
Key takeaways
Most audio guides work best with 8 to 25 stops.
Plan for audio to fill about half of the visit time.
Choose stops where people already pause, there is something to see and a story to tell.
Offer a main route for everyone and an optional deeper layer for enthusiasts.
Watch where listens drop off and cut or merge the weakest stops.
Frequently asked questions
How many stops should a museum audio guide have?
Between 12 and 25 for most museums, depending on the length of the visit. Fifteen to twenty stops of about 90 seconds is a good starting point.
How long should a whole audio tour be?
Around half of the average visit time. For a one-hour visit, about 30 minutes of audio.
Should every object have an audio stop?
No. Choose the objects with a story and something to see, and leave the rest to the labels.
Can I add more stops later?
Yes. On a QR platform you can add stops and codes at any time without changing the ones already printed.
Drafted with AI assistance; researched, edited and fact-checked by the Muvo team.