Skip to content

How long should an audio guide stop be?

Between 60 and 120 seconds, with 90 as the default. Word budgets, why attention drops after two minutes, how to layer longer content and how to use your own listening data to decide.

Last updated
3 min read
3 min read

An audio guide stop should usually last between 60 and 120 seconds, with 90 seconds as a good default. That is about 180 to 220 words at a natural narration pace. Shorter stops feel thin; longer ones lose people, especially standing up.

This guide explains the word budgets, why attention drops, how to handle content that really needs more time and how to let your own data decide.

The 60 to 120 second rule

LengthFeels likeUse it for
Under 45 secondsA captionTransitions, directions, a quick detail
60 to 90 secondsA complete stopMost stops
90 to 120 secondsA rich stopHighlights, key objects
Over 2 minutesA lectureOnly optional deep-dive stops

Ninety seconds is long enough to tell one story well and short enough to hold attention while standing in front of an object.

Word budgets

Narration for audio guides is slower than conversation. Look2Innovate, an audio guide equipment maker, recommends 120 to 150 words per minute. At that pace:

DurationWords
60 seconds120 to 150
90 seconds180 to 220
120 seconds240 to 300

Write to the word budget, then read the stop aloud with a stopwatch. Your own pace is the one that counts.

Why attention drops

Listening to an audio guide is more tiring than it looks:

  • Visitors are standing, often in a crowd.
  • They are looking and listening at once, switching between the object and the voice.
  • They cannot skim a slow passage the way they would on a page.
  • They have many stops ahead, and they know it.

After about two minutes, many people start to drift: they look at the next room, check their phone or move on with the audio still playing. A guide made of short stops gets listened to; a guide made of long ones gets sampled.

Layering: when there is more to say

Some objects deserve more than two minutes. Instead of one long stop, split the content.

  1. Main stop (90 seconds): the one idea, for everyone.
  2. Optional deeper stop (60 to 120 seconds): the technique, the controversy, the curator's view, for those who want it.

On a QR guide, the deeper stop can have its own code marked "more", or it can be a separate themed tour for specialists. Visitors choose; nobody is forced to stand through four minutes.

How to shorten a stop

When a stop runs long, cut in this order:

  1. Context. The bigger picture is the easiest block to trim.
  2. Second ideas. If the stop has two stories, move one to another stop or a deeper layer.
  3. Dates and names. Keep one of each, at most.
  4. Adjectives. "Very beautiful, delicate and remarkable" becomes "delicate".
  5. Repetition of the label. Anything visitors can read beside the object goes.

Never cut the instruction to look. It is what makes audio worth listening to.

Use your own listening data

The best answer to "how long?" comes from your visitors. Once the guide is live, look at each stop:

  • Listens: how many people start it.
  • Completion: how many listen to the end.
  • Language: whether the pattern is the same in every language.

If a stop has many listens but low completion, it is probably too long or starts too slowly. Shorten it, move the hook to the first sentence and check again after a month. If a short stop is always completed and the next one is skipped, the route itself may be the problem.

Whole-tour length

Stop length and tour length go together. Twenty stops of 90 seconds make 30 minutes of audio, which suits a visit of about an hour. How many stops should an audio guide have? explains how to balance the two.

Key takeaways

  • Aim for 60 to 120 seconds per stop, with 90 seconds as the default.

  • Ninety seconds is about 180 to 220 words at 120 to 150 words per minute.

  • Attention drops after about two minutes standing in front of an object.

  • Split long content into a main stop and an optional deeper stop.

  • Use completion rates to find stops that are too long.

Frequently asked questions

  1. How long should an audio guide stop be?

    Between 60 and 120 seconds. Ninety seconds is a good default for most stops.

  2. How many words are in a 90-second audio guide stop?

    About 180 to 220 words, depending on the narrator's pace.

  3. What if an object needs a longer explanation?

    Split it into a 90-second main stop and an optional deeper stop for visitors who want more.

  4. How do I know if my stops are too long?

    Look at completion rates: if many visitors start a stop but few finish it, shorten it.

Drafted with AI assistance; researched, edited and fact-checked by the Muvo team.